HOW TO ASSEMBLE BLUM TANDEMBOX ANTARO DEEP DRAWER
Quick & Easy Assembly Guide with Step-by-Step Instructions

This comprehensive guide outlines the streamlined process to assemble your Blum Tandembox Antaro deep drawer. For visual reference, procedural videos are available on the product page.

Tools & Materials Required

Gather the following before starting:

• Cordless drill driver or equivalent
• Phillips screwdriver
• Set square or straight edge
• Tape measure
• Pencil
• Support platform (taller than drawer sides)
• 10mm drill bit + electrical tape (to mark drill depth)
• Complete Blum Tandembox Antaro deep drawer kit

Key Assembly Notes

• Back Bracket Handling: Back brackets are shipped loose to prevent transit damage. Each drawer includes 1 left and 1 right bracket (side-specific).
• Orientation Check: Brackets fit only one way on their respective drawer sides.

Step-by-Step Assembly Process

1. Attach Back Brackets to Drawer Sides

• Align the back bracket with the drawer side as illustrated in the product image.
• Apply firm downward pressure until a click confirms secure locking.
• Repeat for the opposite side, ensuring correct left/right placement.

2. Position Drawer Base & Sides

• Place the drawer base on the support platform.
• Align the first drawer side tightly against the base panel, ensuring end-to-end alignment (reference diagram for precision).
• Secure the side to the base using the provided screws.
• Repeat the process for the second drawer side.

3. Install Back Panel

• Flip the drawer assembly over to access the base underside.
• Slide the back panel into the pre-defined slot until fully seated.
• Fasten the back panel with the included 10x15mm screws.

4. Prepare for Drawer Runner Installation

• With the main structure assembled, use a pencil and tape measure to mark the mounting points for the drawer runners.
• Reference the product manual for exact positioning guidelines.

Pro Tips for Accuracy

• Depth Control: Use electrical tape on the drill bit to mark the recommended drill depth (prevents over-drilling).
• Alignment Check: Use a set square to verify 90° angles between sides and the base.

By following these steps, you’ll efficiently assemble your Blum Tandem box Antaro deep drawer, ensuring a secure fit and smooth operation. For further assistance, refer to the product page resources or contact Blum support.